View unanswered posts  View active topics

Page 1 of 1

[ 25 posts ] 

Author 
Message 
doesnotcommute

Post subject: How to solve the Curvy Copter Skewb? Posted: Thu Jan 24, 2013 9:33 pm 

Joined: Thu Oct 04, 2012 8:49 pm

I can solve a curvy copter, a skewb, and unjumble the CCS but I just cannot figure out a pure 3cycle for the two triangular edge pieces on the Curvy Copter Skewb. I've been working on this off and on for about a month now and I must have tried all the wrong ways to solve this puzzle. Any and all help will be greatly appreciated.


Top 


Brandon Enright

Post subject: Re: Help with Curvy Copter Skewb edges Posted: Thu Jan 24, 2013 10:24 pm 

Joined: Thu Dec 31, 2009 8:54 pm Location: Bay Area, California

I haven't worked out a solveorder for this puzzle however looking at it using Gelatinbrain's program (it's puzzle 3.6.9) I'd solve them very early with a [1,1] commutator like [RBD, UR, RBD', UR]
If you can afford to move the triangles / shields (which are easy to cycle pure) and the slivers then this should help you: [RBD', UR, RBD, FU, DFR', FU, RBD', UR, RBD, FU, DFR, FU]
Here is a pure sequence for shields: [RBD', UR, RBD, DFR, FU, DFR', RBD', UR, RBD, DFR, FU, DFR']
And there is a simple nonpure (shield + sliver) [3,1] cycle.
A pure 3cycle for those CC centeredges is going to be long and hard to find. I'll search for one if you really want to them pure.
_________________ Prior to using my real name I posted under the account named bmenrigh.


Top 


doesnotcommute

Post subject: Re: Help with Curvy Copter Skewb edges Posted: Thu Jan 24, 2013 10:48 pm 

Joined: Thu Oct 04, 2012 8:49 pm

Okay that makes a lot of sense. I was trying to group skewb corners (the corner, sliver, and triangle edge) and then solve the curvy copter part. the pure shields 3cycle will definitely come in handy, thank you. And please do not look for a pure 3cycle for the edges, I was just making sure I was not missing a simple way to do so. So the new strategy is solve curvy copter edges with triangle edges first.


Top 


Brandon Enright

Post subject: Re: Help with Curvy Copter Skewb edges Posted: Thu Jan 24, 2013 11:20 pm 

Joined: Thu Dec 31, 2009 8:54 pm Location: Bay Area, California

Borrowing a bunch of insights from Daniel Kwan (DKwan) (including a conversation with him via the IRC channel) and looking at this further, I'm semiconvinced that the shortest pure "standard form" commutator for those pieces is [9,1] (20 moves). I'd suggest thinking about reducing to a Curvy Copter as the solution strategy. Check for corner twist early. Other than corner twist I think you won't run into any trouble with a reduction solve.
_________________ Prior to using my real name I posted under the account named bmenrigh.


Top 


doesnotcommute

Post subject: Re: Help with Curvy Copter Skewb edges Posted: Thu Jan 24, 2013 11:27 pm 

Joined: Thu Oct 04, 2012 8:49 pm

Agreed! Also I am amazed that people can come up with commutators like that, especially on "skewbic" puzzles. However if you don't mind I would like to see that commutator just for fun .


Top 


Brandon Enright

Post subject: Re: Help with Curvy Copter Skewb edges Posted: Thu Jan 24, 2013 11:34 pm 

Joined: Thu Dec 31, 2009 8:54 pm Location: Bay Area, California

doesnotcommute wrote: Agreed! Also I am amazed that people can come up with commutators like that, especially on "skewbic" puzzles. However if you don't mind I would like to see that commutator just for fun . Sure: [RBD, FDL', RF, DF, RD, DF, RF, FDL, RBD', UR, RBD, FDL', RF, DF, RD, DF, RF, FDL, RBD', UR] If you haven't seen my http://www.brandonenright.net/cgibin/gb_util.pl program then go ahead and paste in in there. It'll tell you the "form" of the commutator. Before you look at a 20move routine and think it's something special, understand that finding it took almost no thought. All I did was look at ways to separate the piece you want to cycle from the adjacent pieces. Once you look at it from that perspective it's easy to come up with a variety of 20move sequences.
_________________ Prior to using my real name I posted under the account named bmenrigh.


Top 


JackRTully

Post subject: Re: Help with Curvy Copter Skewb edges Posted: Fri Jan 25, 2013 2:49 am 

Joined: Sun Aug 26, 2012 10:01 am

Brandon, could you post an image of the CCS with labels so I can understand better what you're referring to as shields, slithers etc
_________________ My YouTube, including a FF Siamese 2x2x2 Walkthrough


Top 


Konrad

Post subject: Re: How to solve the Curvy Copter Skewb? Posted: Mon Jan 28, 2013 11:40 am 

Joined: Thu Sep 17, 2009 6:07 am Location: Germany, Bavaria

I made the title of this topic more general. I wrote here back in December Quote: It is one of my best Shapeways puzzles. The fun per dollar ratio is very good! ... 6. Solving itI'll talk about doing doctrinaire turns only and I shall not go not into details (this is not the Solving Forum). When I started looking at "How to solve a CCS", I was a bit frightened about the new piece types not existent  or unvisible  on a Helicopter Skewb. The Helicopter Skewb is pretty easy unless you want to jumble it. I looked for a fitting Gelatinbrain puzzle. I could not spot one, so I went ahead looking for move sequences carefully trying to avoid to scramble it thoroughly. Unfortunatly I got lost very soon and had to solve it from a completely scrambled state. When it was scrambled a bit, I did my best to scramble it thoroughly. Scrambling the CCS is easy Fortunately, it turned out that a solution was quite accessible for me. It was not easy, but it wasn't hard either. Just right! The difficulty level, I really like. I had written to Gelatinbrain a PM and asked if he could be so nice to add the puzzle to his program. Today, I got the news from him, that he has added it as 3.6.9. He said that we can start now a thread "How to solve the Curvy Copter Skewb". Actually, we could, if we have a few members in the CCS fan club. I wonder, if Luke could tell us how many CCS have been sold? I did not have the time to solve it very often. Reduction to a Curvy Copter seems quite natural and this is what I did: 1. Group the twelve groups of four edge pieces to Curvy Copter edges (i. e. reduction to a Curvy Copter with scrambled centres) a. small edges with two stickers b. large edge pieces with one sticker 2. Solve the outer centre pieces (those adjacent to a corner) by moving around pairs of centres (i.e. centres of the Curvy Copter) You can do this with Curvy Copter jumbling moves. I prefer a combination of Skewb and Helicopter turns as on a Helicopter Skewb. 3. Solve the inner centres using pure 3cycles 4. We have now a fully reduced Curvy Copter. If you have reduced the centres at the correct location, only the corners are remaining. This picture explains the names I'm using in relation to Brandon's names: I invented my own notation, but I'll use here Gelatinbrain notation. Faces are named as on a normal 3x3x3 and two letters denote a Helicopter turn (e.g. FU), three letters a vertex Skewb turn (e.g. DRB = clockwise 90° turn around vertex Down/Right/Back) As Brandon pointed out, you will check for a single twisted corner very early (= Helicopter corner solve) and build the twelve edges at there correct location. I prefer to start with the `small edges` with two stickers, because I find this visually easier, doing [1:1] conjugates to swap two edges. For the `large edges` I found three impure 3cycles. I'll show the sequences and a picture showing the result when I start with a solved puzzle: 1.b.1 [[RBD':UR],[ULB:FL]] ( as [[1:1], [1:1]] commutator ) or explicitly [RBD', UR, RBD, ULB, FL, ULB', RBD', UR, RBD, ULB, FL, ULB'] 1.b.2 DFR', RBD', DFR, RBD, DBL, RBD, DBL', RBD', FU, RBD, DBL, RBD', DBL', RBD', DFR', RBD, DFR, FU 1.b.3 RD, BRU, LUF', BRU', LUF, DBL, DFR', LUF, DFR, LUF', DBL', RD, DBL, LUF, DFR', LUF', DFR, DBL', LUF', BRU, LUF, BRU' The sequence above I have found first. It is based on a normal Skewb Corner twist  I took it over from Julian a long time ago  and its inverse, a [10,1] commutator. If you start with the `large edges`, here is Brandon's 3cycle for the small edges above: [[RBD':UR],[FU:DFR']] or [RBD', UR, RBD, FU, DFR', FU, RBD', UR, RBD, FU, DFR, FU] And here is the 20 move pure 3cycle: [[RBD:[FDL':[RF:[DF:RD]]]],UR] or [RBD, FDL', RF, DF, RD, DF, RF, FDL, RBD', UR, RBD, FDL', RF, DF, RD, DF, RF, FDL, RBD', UR] The reduction of the Curvy Copter centres is pretty straight forward. I prefer to have them at their final location and solve the outer centres first in step 2. e.g. via [[DFR:UR],UB] or [DFR, UR, DFR', UB, DFR, UR, DFR', UB] A pure 3cycle for the inner centres (`shields`): [[DFR:FU],UR] or [DFR, FU, DFR', UR, DFR, FU, DFR', UR] EDIT: Just for fun I tried to find a pure commutator for a LargeEdges 3cycle: [[[ULB:RBD']:[[ RD DL]:DF]],UR] or [ULB, RBD', ULB', RD, DL, DF, RD, DL, ULB, RBD, ULB', UR, ULB, RBD', ULB', DL, RD, DF, DL, RD, ULB, RBD, ULB', UR] 24 turns; a [11,1] commutator Brandon will probably find a shorter one. Nobody really needs this EDIT2: BTW, if you look carefully at my avatar, you can probably recognize the puzzle in the little girls hand?
_________________ My collection at: http://sites.google.com/site/twistykon/home


Top 


rubikcollector123

Post subject: Re: How to solve the Curvy Copter Skewb? Posted: Sun Mar 03, 2013 6:21 am 

Joined: Fri Nov 05, 2010 2:20 am Location: Wherever

Konrad wrote: For the `large edges` I found three impure 3cycles.
I'll show the sequences and a picture showing the result when I start with a solved puzzle: 1.b.1 [[RBD':UR],[ULB:FL]] ( as [[1:1], [1:1]] commutator ) or explicitly [RBD', UR, RBD, ULB, FL, ULB', RBD', UR, RBD, ULB, FL, ULB'] In this algorithm (and the rest), which face is U, R, F etc ? Apologies for the bump
_________________ A budding puzzle designer!
Check out my Shapeways shop!


Top 


Burgo

Post subject: Re: How to solve the Curvy Copter Skewb? Posted: Sun Mar 03, 2013 6:56 am 

Joined: Tue Feb 08, 2011 3:17 am Location: Australia

Three letters like RBD' would be a skewb vertex twist. Two letters like UR would be a helicopter edge twist. U, R, F etc are the same as an RC.
_________________ 1st 3x3 solve Oct 2010 (Even though I lived through the 80s). PB 3x3 55sec Jan 2011 (When I was a kid 1:30 was speedcubing so I'm stoked). 1st 3x3 Earth (nemesis) solve Jan 2011 My You Tube (Now has ALLCrazy 3X3 Planets with Reduction)


Top 


rubikcollector123

Post subject: Re: How to solve the Curvy Copter Skewb? Posted: Sun Mar 03, 2013 7:01 am 

Joined: Fri Nov 05, 2010 2:20 am Location: Wherever

I know that. But, look at the image for the 3 cycle. Which face (red, white or green) should be designated U, F or R for the algorithm to work?
_________________ A budding puzzle designer!
Check out my Shapeways shop!


Top 


Burgo

Post subject: Re: How to solve the Curvy Copter Skewb? Posted: Sun Mar 03, 2013 7:06 am 

Joined: Tue Feb 08, 2011 3:17 am Location: Australia

Try U as white, F as Green, and R as Red.
_________________ 1st 3x3 solve Oct 2010 (Even though I lived through the 80s). PB 3x3 55sec Jan 2011 (When I was a kid 1:30 was speedcubing so I'm stoked). 1st 3x3 Earth (nemesis) solve Jan 2011 My You Tube (Now has ALLCrazy 3X3 Planets with Reduction)


Top 


rubikcollector123

Post subject: Re: How to solve the Curvy Copter Skewb? Posted: Sun Mar 03, 2013 7:39 am 

Joined: Fri Nov 05, 2010 2:20 am Location: Wherever

That doesnt seem to work...
_________________ A budding puzzle designer!
Check out my Shapeways shop!


Top 


Konrad

Post subject: Re: How to solve the Curvy Copter Skewb? Posted: Sun Mar 03, 2013 8:55 am 

Joined: Thu Sep 17, 2009 6:07 am Location: Germany, Bavaria

rubikcollector123 wrote: That doesnt seem to work... All my pictures / diagrams show the same colour situation U = white F = green R = red. I double checked the sequence RBD', UR, RBD, ULB, FL, ULB', RBD', UR, RBD, ULB, FL, ULB' (12 turns  a [[1:1],[1:1]] commutator) in Gelatinbrain 3.6.9 and it does what it is supposed to do There must be a problem with the interpretation of the notation (Gelatinbrain's). Single letters denote faces (but never turns) Three letters denote a vertex turn: RBD is the vertex at Right/Back/Down turned clockwise by 120°; RBD is the same vertex turned counterclockwise. The edge turns should be clear? Can you run Gelatinbrain? Do you know Brandon's sequence utility?This would produce a disassembly of the 12 moves as [[RBD':UR],[ULB:FL]] I think you are familiar with the commutator/ conjugates notation? If really necessary, I can make a move sequence of the twelve moves, but that is a lot of work. (I do not have video equipment.) EDIT: I have made a sequence using Gelatinbrain 3.6.9. It starts with a solved Cube and is followed by 12 diagrams for the 12 moves. Each diagram shows all faces in the usual frontview/backview fashion of Gelatinbrain. Each single turn is followed by the resulting situation, left to right, top to down. I hope this helps. You can click onto the picture to enlarge it. EDIT2: No reaction, are you still lost? Here are 4 pictures showing the four turns involved in midturn on a physical puzzle (RBD, UR, ULB, FL) EDIT3: Just to be sure that the notation is interpreted correctly: In all notations I know of, the apostrophe stands for anticlockwise. E.g. WCA notation: Quote: 12a) Notation for Rubik's Cube and similar puzzles: 12a1) Face Moves: 12a1a) Clockwise, 90 degrees: F (front face), B (back face), R (right face), L (left face), U (upper face), D (bottom face). 12a1b) Anticlockwise, 90 degrees: F', B', R', L', U', D'.
_________________ My collection at: http://sites.google.com/site/twistykon/home


Top 


rubikcollector123

Post subject: Re: How to solve the Curvy Copter Skewb? Posted: Sat Apr 13, 2013 8:37 pm 

Joined: Fri Nov 05, 2010 2:20 am Location: Wherever

Apologies for yet another bump, but I ran into another weird parity while doing a jumbling solve.
It is a 2 corner swap. (Or a 1 center flip if you wish)
Any tips? What happened?
_________________ A budding puzzle designer!
Check out my Shapeways shop!


Top 


Brandon Enright

Post subject: Re: How to solve the Curvy Copter Skewb? Posted: Sun Apr 14, 2013 3:11 am 

Joined: Thu Dec 31, 2009 8:54 pm Location: Bay Area, California

rubikcollector123 wrote: Apologies for yet another bump, but I ran into another weird parity while doing a jumbling solve.
It is a 2 corner swap. (Or a 1 center flip if you wish)
Any tips? What happened? These sorts of issues are the gems of solving that make it all worth it. I'd hate to ruin the experience of figuring this situation out so I break this up into hints for you. Hint 1: [ You've already spotted that two corners swapped is the same as a single edgecenter group flipped. If you solve the corners you have to flip the edgecenter group.] Hint 2: [ You know, even with jumbling, that there are always two small edges in the edgecenter group so no mater how much you jumble the puzzle, and edgeturn swaps them and changes the parity of the small edges.] Hint 3: [ Changing the parity of the small edges is the same as flipping and edgecenter group. Every edge turn always changes their parity but there is a case while jumbling where an edgeturns does not change the parity of the corners.] Hint 4: [ The corners are equivalent to another piece type on the puzzle. You can use that to change the parity of the corners (and flip a edgecentergroup), and then put the equivalent pieces in the corner spots, and reflip the edgecenter group.] Hint 5: [ Use two identically colored inner center (shield) pieces because you can't see a swap of those. The inner center pieces are essentially the same as corners when you jumble.] I'd demonstrate on my print but the pieces are all encased in super glue right now. Edit: I changed the names of the pieces to match Konrad's names.
_________________ Prior to using my real name I posted under the account named bmenrigh.
Last edited by Brandon Enright on Sun Apr 14, 2013 3:38 pm, edited 2 times in total.


Top 


Konrad

Post subject: Re: How to solve the Curvy Copter Skewb? Posted: Sun Apr 14, 2013 9:24 am 

Joined: Thu Sep 17, 2009 6:07 am Location: Germany, Bavaria

rubikcollector123 wrote: Apologies for yet another bump, but I ran into another weird parity while doing a jumbling solve.
It is a 2 corner swap. (Or a 1 center flip if you wish)
Any tips? What happened? I'm confused a bit and I guess it has to do with names. I used these names before: " Center" (= centre in BE) would mean a composed Curvy Copter centre = "inner centre" + "outer centre". I guess, "1 center flip" refers to a flip of the centre of rotation = Curvy Copter edge? So far, I had assumed that a Curvy Copter Skewb can be solved after unjumbling just using doctrinaire (i.e normal, nonjumbling Helicopter and Skewb) moves. I understand this is not true, right? Your situation is: Everything is solved, just two corners are swapped? I was so intimitated by my failure to unjumble the Unbandaged Helicopter Skewb that I never dared to jumble the Curvy Copter Skewb. EDIT: I tried to swap two corners on a Curvy Copter, but I end up with a flipped edge: So, I guess your problem has to do with Skewb jumbling turns.
_________________ My collection at: http://sites.google.com/site/twistykon/home


Top 


Brandon Enright

Post subject: Re: How to solve the Curvy Copter Skewb? Posted: Sun Apr 14, 2013 1:46 pm 

Joined: Thu Dec 31, 2009 8:54 pm Location: Bay Area, California

Konrad wrote: I'm confused a bit and I guess it has to do with names. I updated my hints to use your names. I agree having a standard people follow helps Konrad wrote: I was so intimitated by my failure to unjumble the Unbandaged Helicopter Skewb that I never dared to jumble the Curvy Copter Skewb. I really hope you revisit the jumbling on these puzzles. If you want to work on things in order of difficulty I'd suggest: Helicopter Cube / Curvy Copter. You have to get very comfortable with the jumbling to the point where any situation you find yourself in you immediately know how to fix. Absolutely no "guess and check unjumbling" or random turning. Unbandaged Helicopter cube (just don't use any Skewb turns or use Eric's puzzle). The unbandaging makes things get crazy quick. At first unjumbling will consist of random guessing almost exclusively and as you become more comfortable with corners swapping with inner centers and dealing with twisted inner centers you'll find unjumbling it pretty fun and easy. Helicopter Skewb or Curvy Copter Skewb. This introduces the jumbling of the Copter edgecenters which are tricky at first. I prioritize unjumbling the edgecenters before unjumbling the rest of the puzzle. Unbandaged Helicopter Skewb. This combines all of the issues into one crazy jumbling experience. It actually isn't much harder than the Helicopter Skewb or Unbandaged Helicopter cube. The additional jumbling freedom makes for mind boggling situations but also allows for much more unjumbling freedom. Konrad wrote: EDIT: I tried to swap two corners on a Curvy Copter, but I end up with a flipped edge[...] So, I guess your problem has to do with Skewb jumbling turns. I addressed this case in September with "Edit 2" of viewtopic.php?p=287719#p287719It doesn't have to do with "Skewb jumbling turns" so much as what Skewb Turns do to the normal Curvy Copter jumbling state. With only Curvy Copter jumbling these corner + innercenter groups always stay together: Attachment:
CurvyCopterCornersSwappedGroup.png [ 174.98 KiB  Viewed 2632 times ]
It isn't possible to get into a situation where the highlighted region doesn't contain a corner. This means that every edge turn always swaps two corners. When you add the Skewb turn, you can split these corner + innercenter groups which allows you to get into a situation where an edge turn doesn't swap two corners.
_________________ Prior to using my real name I posted under the account named bmenrigh.


Top 


Konrad

Post subject: Re: How to solve the Curvy Copter Skewb? Posted: Sun Apr 14, 2013 4:46 pm 

Joined: Thu Sep 17, 2009 6:07 am Location: Germany, Bavaria

This discussion motivated me to look at "Helicopter jumbling" (in a generic sense) again. I have jumbled and solved the Curvy Copter and Helicopter Cube often in the past. Actually, I got the Curvy Copter three years ago and it was my first jumbling puzzle ever. I revisted it during my Christmas holidays. Thanks for your list. I'm just not sure if I will ever become a jumbling fan like you I feel that doctrinaire twisty puzzles are based on real sience (group theory), while jumbling has the touch of "try and error" and ad hoc intuition. Just my opinion. Maybe I'll change my opinion, if our friend bhearn returns and solves a jumbled Helicopter Skewb. (bhearn had given it up and I judge his solving capabilities as outstanding.) bmenrigh wrote: ... Helicopter Cube / Curvy Copter. ... Unbandaged Helicopter cube (just don't use any Skewb turns or use Eric's puzzle). The unbandaging makes things get crazy quick. At first unjumbling will consist of random guessing almost exclusively and as you become more comfortable with corners swapping with inner centers and dealing with twisted inner centers you'll find unjumbling it pretty fun and easy. Do you mean, I should use Luke's Curvy Copter Skewb (CCS) without Skewb turns? (I have not got Eric's Unbandaged Helicopter Cube and the Original (not Unbandaged) version of Tom's Helicopter Skewb. bmenrigh wrote: Helicopter Skewb or Curvy Copter Skewb. ... I think that the Curvy Copter Skewb would be the easier choice, because I can see the edge jumbling directly. (bhearn had wanted a transparent Helicopter Skewb. Maybe, he would be pleased with the CCS? rubikcollector123 wrote: Apologies for yet another bump, but I ran into another weird parity while doing a jumbling solve.... rubikcollector123, would you mind to elaborate the other weird parities?
_________________ My collection at: http://sites.google.com/site/twistykon/home


Top 


rubikcollector123

Post subject: Re: How to solve the Curvy Copter Skewb? Posted: Sun Apr 14, 2013 6:02 pm 

Joined: Fri Nov 05, 2010 2:20 am Location: Wherever

The 1 corner orientation parity (not jumbling but still a parity) and the 1 cornerslivershield block thats out of shape parity. (that one i know how to fix)
Speaking of which, what happens if one replaces all the shield pieces with cornersliver blocks and sanded it back to cubic?
_________________ A budding puzzle designer!
Check out my Shapeways shop!


Top 


Brandon Enright

Post subject: Re: How to solve the Curvy Copter Skewb? Posted: Sun Apr 14, 2013 6:44 pm 

Joined: Thu Dec 31, 2009 8:54 pm Location: Bay Area, California

rubikcollector123 wrote: The 1 corner orientation parity (not jumbling but still a parity) and the 1 cornerslivershield block thats out of shape parity. (that one i know how to fix) We don't have an agreedupon name for this sort of problem but "parity" isn't it. I often call it "excess twist". rubikcollector123 wrote: Speaking of which, what happens if one replaces all the shield pieces with cornersliver blocks and sanded it back to cubic? I'm inclined to say you'd be sanding pieces closer and closer to the spherical version of the puzzle.
_________________ Prior to using my real name I posted under the account named bmenrigh.


Top 


Konrad

Post subject: Re: How to solve the Curvy Copter Skewb? Posted: Mon Apr 15, 2013 3:34 am 

Joined: Thu Sep 17, 2009 6:07 am Location: Germany, Bavaria

The Bump created an interesting conversation and I hope others will find it interesting as well. rubikcollector123 wrote: ...and the 1 cornerslivershield block thats out of shape parity. (that one i know how to fix)..... Obviously, you mean a situation like this (the invisible part is all cubic): Interesting question: Should we call this a parity? We had several discussions about the term "parity" (most recently here and I know we should not be completely mathematically puristic about saying "This is a parity". Let me repeat the Wikipedia definition: Wikipedia wrote: In mathematics, when X is a finite set of at least two elements, the permutations of X (i.e. the bijective mappings from X to X) fall into two classes of equal size: the even permutations and the odd permutations. If any total ordering of X is fixed, the parity (oddness or evenness) of a permutation σ of X can be defined as the parity of the number of inversions for σ, i.e., of pairs of elements x,y of X such that x < y and σ(x) > σ(y). When cubers say "This is a parity" they mean that an odd number of swaps (in group theory "transpositions") in a group of pieces (piece types) is necessary to get to the solved state. The solved state when unjumbling is the cubic shape. While unjumbling, we care about shape only and we can consider the paired "corner+sliver piece" to be in the same piece group as the "shield". Therefore, the term "parity" is justified. We need a single swap to reach the final cubic shape. Anyway, we should use the word "parity" describing an permutation issue, only. (The flipped edge parity on the 4x4x4 is a "parity error" when viewing the 4x4x4 as a reduced 3x3x3. Actually, it is a swap of two 4x4x4 edges.) I have now swapped two corners on an otherwise solved cube: Thanks to Brandon's hints even I  a jumbling novice on this cube  was able to do this. I do not have a short sequence, more a recipe  not more than in Brandon's hints. rubikcollector123, if you are still having problems, I could make a picture sequence. The CCS is not very much scrambled by following this recipe, a few pieces have to be relocated by doctrinaire moves afterwards. EDIT: Here is the situation after a few (36) moves: If we agree upon a notation describing jumbling moves, I can write it down for you. I use <X>j for a clockwise turn of X to the next jumbling position. E.g. URBj would be a jumbling Skewb turn of vertex URB and URBj' would be the reversed turn.
_________________ My collection at: http://sites.google.com/site/twistykon/home


Top 


JackRTully

Post subject: Re: How to solve the Curvy Copter Skewb? Posted: Fri Aug 30, 2013 6:55 am 

Joined: Sun Aug 26, 2012 10:01 am

(Sorry for the bump) I received my puzzle 2 days ago, and I solved it this morning! I didn't reduce the puzzle to a curvy copter, or even a skewb. I found even the thought of that to be too much work and it just seemed to complicated, for reasons I'll explain later. The first thing I do is solve the small edges on the white side using a skewb turn, a 180 curvy copter turn and then undoing the skewb turn. After they are complete I solve the small edges on the yellow side and then finish off with the equatorial edges, and some set up moves are required. Then I solve all the corners in relation to the newly created edge/centers and I make sure all the edges are orientated correctly. If on the last layer I have a corner orientation parity I solve that corner alone by doing a skewb turn and then resolving all the edges I destroyed using a couple tricks I came up with. Now I'm certain I won't have parity I proceed to solving the larger edge pieces using an easy algorithm I found (which is shorter than any I see in this thread) which is URF' LUF URF LUF' DF LUF URF' LUF' URF DF. Attachment:
CCS ALG.PNG [ 19.7 KiB  Viewed 1586 times ]
I then finally solve the shield pieces with Konrad's algorithm; DFR, FU, DFR', UR, DFR, FU, DFR', UR I also use (URF' LUF URF LUF')x6 to rotate the centers on the U F L & R face as a set up move quite often. Oh yeah.. My reasons for not reducing..? Right.. Well I just prefer to do it this way! I had other reasons thinking it was easier but after actually thinking about it it doesn't make much of a difference. I don't think I've added much to this thread except a shorter algorithm for the large center pieces
_________________ My YouTube, including a FF Siamese 2x2x2 Walkthrough


Top 


rubikcollector123

Post subject: Re: How to solve the Curvy Copter Skewb? Posted: Fri Aug 30, 2013 9:36 am 

Joined: Fri Nov 05, 2010 2:20 am Location: Wherever

I solve the CCS similarly. I start with the corners to check for the 1corner twist. (After some solves, solving the bottom 4 corners is sufficient for me to fix the 1corner twist). Then I solve the small edge pieces first on one face, then the equitorial ones, then the top layers using setups and impure 3cycles. Then I resolve the corners to check for flipped curvy copter centers, and as a guide to solving larger curvy copter centers. For the larger center pieces, I use a mixture of curvy copter turns and skewb center orientation algorithms to cycle them. (This is where most lockups happen ) After all the Curvy copter centers are fixed, I solve the sliver and corners with curvy copter moves, followed by solving the shield pieces with Konrad's sequence. (By the way, moving the last move of DFR, FU, DFR', UR, DFR, FU, DFR', UR to the front gives the reverse of the sequence. Hmm.)
_________________ A budding puzzle designer!
Check out my Shapeways shop!


Top 


JackRTully

Post subject: Re: How to solve the Curvy Copter Skewb? Posted: Fri Aug 30, 2013 9:38 am 

Joined: Sun Aug 26, 2012 10:01 am

rubikcollector123 wrote: By the way, moving the last move of DFR, FU, DFR', UR, DFR, FU, DFR', UR to the front gives the reverse of the sequence. Hmm. Yeah I noticed this as well, its very helpful in the solve!
_________________ My YouTube, including a FF Siamese 2x2x2 Walkthrough


Top 



Page 1 of 1

[ 25 posts ] 

Who is online 
Users browsing this forum: No registered users and 5 guests 

You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum


