View unanswered posts  View active topics

Page 1 of 1

[ 8 posts ] 

Author 
Message 
kami_sama

Post subject: Help solving the 3x3x7 Posted: Sun Nov 18, 2012 6:08 am 

Joined: Sun Sep 23, 2012 6:41 am

I've searched but I haven't found anything on this cube.
I try to solve it like a 3x3x2 first solving the middle layer and then solving the 2 adjacent layers. But I don't seem to be able to do it like that. Most of the time, the right part of the inner layer ends being twisted 180 degrees.
Can someone give me a tip on how to solve it?


Top 


Fredrik

Post subject: Re: Help solving the 3x3x7 Posted: Sun Nov 18, 2012 6:18 am 

Joined: Fri Nov 25, 2011 6:33 am Location: Helsingborg, Sweden

You should be able to look up a 3x3x4 parity algorithm, just apply every u turn to every slice that has the parity.
_________________ {[ On My Way To Enter The Community]} Fredrik


Top 


martywolfman

Post subject: Re: Help solving the 3x3x7 Posted: Sun Nov 18, 2012 6:29 am 

Joined: Tue Sep 11, 2012 1:51 pm Location: Bedford, England

The parity algorithm is slightly different to the normal 3x3x4 algorithm because you will be applying it to an odd number of layers, whereas the 3x3x4 algorithm only works on an even number of flipped pieces, although the difference is minor.
Assuming that you have solved the first 2 layers around the centre, apart from the flipped side here is what you do:
spoiler [The algorithm is U2 R2 F2 U2 F2 R2 U2 F2
Where the U layer is the layer above the the first flipped piece, so the second layer from the top in your case]
edit: I forgot to mention that you need to have the flipped face as your front face when performing the above algorithm, so the pieces that need to be swapped are on the left and right of the front face
_________________ My youtube channel: http://www.youtube.com/user/martywolfman?feature=plcp
Latest videos: Unboxing / Review of Curvy copter Plus, David Gear Cube, Octostar Cube


Top 


kami_sama

Post subject: Re: Help solving the 3x3x7 Posted: Sun Nov 18, 2012 1:21 pm 

Joined: Sun Sep 23, 2012 6:41 am

Marty, your algorithm works, but only when I'm solving the second layer from above. If I'm either in the third or the last layer, it doesn't work.


Top 


KozehCubes

Post subject: Re: Help solving the 3x3x7 Posted: Sun Nov 18, 2012 1:22 pm 

Joined: Sat Mar 31, 2012 10:02 am Location: Hertfordshire, UK

first get it back into cuboid form while doing that insert a cross for the inner most pieces and fill in the edges in the correct place as a normal 3x3, once solved as a 3x3x2 do it as if it was a 3x3x5 then again to solve for a 3x3x7, watch my walkthrough of my 3x3x5 but then repeat the steps for the extra 2 layers https://www.youtube.com/watch?v=eyFbsHrsuY sorry im not very good at explaining, the video might help
_________________ Uh Oh I solved it again..... My Youtube Channel: http://www.youtube.com/KozehCubez PB: 3x3:27.34 4x4: 2:21 Rubiks Clock: 23sec Floppy Cube: 4.5sec 2x2: 8.64sec (single) 2x2: 11.78(Average of 5) Magic0.91 (Single)


Top 


martywolfman

Post subject: Re: Help solving the 3x3x7 Posted: Sun Nov 18, 2012 1:48 pm 

Joined: Tue Sep 11, 2012 1:51 pm Location: Bedford, England

kami_sama wrote: Marty, your algorithm works, but only when I'm solving the second layer from above. If I'm either in the third or the last layer, it doesn't work. in that case you just need to use a different layer as the Up layer  for the U turns, use the layer above the first piece that needs to be switched, as long as all the pieces need to be switched. If you only have the parity problem on one layer then the algorithm is: Spoiler [ Uu2, R2, F2 Uu2, U2, F2, R2, Uu2
Where Uu2 refers to the top half of the flipped pieces and any/all layers above it]
_________________ My youtube channel: http://www.youtube.com/user/martywolfman?feature=plcp
Latest videos: Unboxing / Review of Curvy copter Plus, David Gear Cube, Octostar Cube


Top 


puzzle_weaver

Post subject: Re: Help solving the 3x3x7 Posted: Fri Dec 07, 2012 9:50 pm 

Joined: Sun Mar 25, 2012 7:12 pm

Believe it or not, I actually found it quite easy to solve it by conjugates and the Rubiks website algorithms, matching up the corners then the edges. Is that too much of a spoiler?
Also, what are the parities everyone keeps mentioning?
_________________ Boring monochrome signature


Top 


martywolfman

Post subject: Re: Help solving the 3x3x7 Posted: Sat Dec 08, 2012 7:26 am 

Joined: Tue Sep 11, 2012 1:51 pm Location: Bedford, England

puzzle_weaver wrote: Also, what are the parities everyone keeps mentioning? When solving this or other cuboids similar to it using 'normal' cuboid algorithms (i don't really know how you've done it) you often reach situations where you have 2 pairs of edges pieces that are swapped after finishing all the other pieces in a particular pair of layers, the parity algorithm fixes this
_________________ My youtube channel: http://www.youtube.com/user/martywolfman?feature=plcp
Latest videos: Unboxing / Review of Curvy copter Plus, David Gear Cube, Octostar Cube


Top 



Page 1 of 1

[ 8 posts ] 

Who is online 
Users browsing this forum: MSNbot Media and 5 guests 

You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum


