View unanswered posts  View active topics

Page 1 of 1

[ 17 posts ] 

Author 
Message 
rline

Post subject: How to Solve TomZ & Calvin's 4x4x6 Posted: Fri Apr 27, 2012 4:50 am 

Joined: Mon Feb 28, 2011 4:54 am

Since receiving my 4x4x6 the other day, I've been enjoying it immensely. It turns well and is a nice challenge. I made some video tutorials showing my method of solving it. It's based on the ultimate solution. It's a simple method, namely  Solve centers
 Pair edges of inner 444
 Place edges of inner 444 [and invert last edge pair if needed]
 Solve corners of inner 444 [and swap corners of inner 444 if needed]
 Pair outer edges
 Place outer edges
 Solve outer corners [and swap outer corners if needed]
You can find it at rubiksultimatesolution.blogspot.com OR My youtubeWhile it's not a speedcubing method, I think it's quite straightforward and there are no long algorithms to remember. I hope others will post their solutions here as well.
_________________ Youtube Twisty Puzzling Blogger Twisty Puzzling  Simple Solutions for Puzzling Twisties Tutorials: Pitcher OctoStar Cube  GERANIUM  Wheel of Wisdom


Top 


Pete the Geek

Post subject: Re: How to Solve TomZ & Calvin's 4x4x6 Posted: Fri Apr 27, 2012 8:43 am 

Joined: Thu Dec 15, 2011 10:04 pm Location: Sioux Lookout, Canada

I solve from the scramble like a 4x4x4 ignoring the wing layers (so centres, edge pairing, cross, F2L, LL). It only becomes cuboid once all the corners are done. I then stand the cuboid on it's 4x4 end and solve the wing layers (and ends) like a 3x3x4 ignoring the middle 2 layers. There is a clever intuitive method for pairing the wing centres that I learned from CrazyBadCuber on YouTube. Otherwise, the algs are all from 4x4x4 and 3x3x4. I think that edge pairing the discombobulated shape is a blast .
_________________ PeteTheGeek196 on YouTube


Top 


Burgo

Post subject: Re: How to Solve TomZ & Calvin's 4x4x6 Posted: Fri Apr 27, 2012 5:18 pm 

Joined: Tue Feb 08, 2011 3:17 am Location: Australia

For those who prefer to reduce: it follows that it can be reduced to a 444 and solved as such. It's easier than the 345 in this respect because it's more uniform.
Cheers, Burgo.
_________________ 1st 3x3 solve Oct 2010 (Even though I lived through the 80s). PB 3x3 55sec Jan 2011 (When I was a kid 1:30 was speedcubing so I'm stoked). 1st 3x3 Earth (nemesis) solve Jan 2011 My You Tube (Now has ALLCrazy 3X3 Planets with Reduction)


Top 


rline

Post subject: Re: How to Solve TomZ & Calvin's 4x4x6 Posted: Sun Apr 29, 2012 3:12 am 

Joined: Mon Feb 28, 2011 4:54 am


Top 


Puzzlemad

Post subject: Re: How to Solve TomZ & Calvin's 4x4x6 Posted: Sun Apr 29, 2012 3:43 am 

Joined: Mon Feb 27, 2012 10:57 am Location: In my study drooling over my puzzle hoard  Precioussssss!

rline wrote: Should've made videos using that method. I wait with baited breath! Actually, I'm still waiting for you crazy 3x3 reductions for Mars and Saturn! Have you hit a wall?
_________________ Kevin Hopelessly addicted to puzzles!! Visit my blog: Puzzlemad


Top 


rline

Post subject: Re: How to Solve TomZ & Calvin's 4x4x6 Posted: Sun Apr 29, 2012 3:55 am 

Joined: Mon Feb 28, 2011 4:54 am


Top 


Gotter

Post subject: Re: How to Solve TomZ & Calvin's 4x4x6 Posted: Sat May 26, 2012 8:02 pm 

Joined: Wed Jan 04, 2012 11:08 am Location: Winnipeg, Canada

Hello all! I've been working on solving this fantastic puzzle. Ran into an issue though. On my first scramble a few peices popped out and I'm not sure if I put the back into the right positions, would anyone be able to tell me if this is a solvable position or am I going to have to pop the puzzle again to fix it.


Top 


Pete the Geek

Post subject: Re: How to Solve TomZ & Calvin's 4x4x6 Posted: Sat May 26, 2012 11:52 pm 

Joined: Thu Dec 15, 2011 10:04 pm Location: Sioux Lookout, Canada

Gotter wrote: Hello all! I've been working on solving this fantastic puzzle. Ran into an issue though. On my first scramble a few peices popped out and I'm not sure if I put the back into the right positions, would anyone be able to tell me if this is a solvable position or am I going to have to pop the puzzle again to fix it.
Hi Gotter! Yes, that is a solvable position. I was able to put my 4x4x6 in the same state.
_________________ PeteTheGeek196 on YouTube


Top 


Gotter

Post subject: Re: How to Solve TomZ & Calvin's 4x4x6 Posted: Sun May 27, 2012 7:55 am 

Joined: Wed Jan 04, 2012 11:08 am Location: Winnipeg, Canada

Thanks Pete!
I'll keep working at it


Top 


cubeguy314

Post subject: Re: How to Solve TomZ & Calvin's 4x4x6 Posted: Sun May 27, 2012 9:08 pm 

Joined: Sat Jun 26, 2010 12:06 pm

Actually, does anyone know how to solve that position? I've been working on a solution for that but I come up with any. Any algorithms?
_________________ ~cubeguy314~


Top 


Pete the Geek

Post subject: Re: How to Solve TomZ & Calvin's 4x4x6 Posted: Sun May 27, 2012 10:48 pm 

Joined: Thu Dec 15, 2011 10:04 pm Location: Sioux Lookout, Canada

cubeguy314 wrote: Actually, does anyone know how to solve that position? I've been working on a solution for that but I come up with any. Any algorithms? I don't have a single algorithm to fix this, but I can provide my strategy. The issue is a pair of swapped edge pieces on two edges, sometimes called "edge parity", which happens regularly on 4x4 cubes at the end of edge pairing. The 4x4 algorithm to fix swapped edges works on the 4x4x6, but first you have to get the two edges onto the left and right side of a 4x4 face. For example, turn the puzzle so that one of the swapped edges is on the left of a 4x4 face. With the 4x4 face as "F" do: B2 R2 to bring the other swapped edge to the right side of the 4x4 face. Now use the algorithm (a snip from my4x4 notes): Attachment:
4x4 edge parity.PNG [ 25.26 KiB  Viewed 4007 times ]
Where "Dw"is a 2layer turn. This fixes the swapped edges, but breaks the cuboid form. At this point the 4x4x6 is at the "edge pairing finished" stage. The next steps would be: bottom cross, first two layers, last layer (returns to cuboid) and then the last bit of solving the wing layers. It goes quickly, because the puzzle is not very scrambled. Please feel free to ask questions.
_________________ PeteTheGeek196 on YouTube


Top 


WilliamF

Post subject: Re: How to Solve TomZ & Calvin's 4x4x6 Posted: Mon May 28, 2012 11:38 am 

Joined: Fri May 15, 2009 3:12 pm

cubeguy314 wrote: Actually, does anyone know how to solve that position? I've been working on a solution for that but I come up with any. Any algorithms? You need to look this cube like a 4x4x4. If you turn the right inner face clockwise : MR ( or maybe r ) you've got a parity position (I guess you know how to solve it)


Top 


Doug Roth

Post subject: Re: How to Solve TomZ & Calvin's 4x4x6 Posted: Sun Sep 02, 2012 2:57 pm 

Joined: Sun May 29, 2011 2:56 pm Location: New York


Top 


Tor S

Post subject: Re: How to Solve TomZ & Calvin's 4x4x6 Posted: Sun Sep 02, 2012 4:09 pm 

Joined: Mon Jun 25, 2012 2:40 pm

For those i hold the cube with a 4x6 face as F, and 4x4 as U. Put unsolved centers on F and B, turn one of the middle L or R slices to solve them, then exchange for other unsolved ones, then slice back. When i have no more unsolved ones to exchange for, i put centers of the same color opposite eachother, then slice back.


Top 


Puzzlemad

Post subject: Re: How to Solve TomZ & Calvin's 4x4x6 Posted: Sun Sep 02, 2012 4:20 pm 

Joined: Mon Feb 27, 2012 10:57 am Location: In my study drooling over my puzzle hoard  Precioussssss!

I use the same technique as I do for my 5x5x4. The best tutorial (which is split into appropriate sections) comes from Dan Fast (Crazybadcuber). It can be found at: http://youtu.be/GZVEUSIpEOoHope this helps  it looks difficult but really isn't to bad. This is one of my favourite puzzles!
_________________ Kevin Hopelessly addicted to puzzles!! Visit my blog: Puzzlemad


Top 


robertpauljr

Post subject: Re: How to Solve TomZ & Calvin's 4x4x6 Posted: Sun Sep 02, 2012 10:53 pm 

Joined: Sun Aug 12, 2007 8:28 pm Location: Northern Central California

rubixwiz031 wrote: Does anyone have some tips for solving the 2nd and 5th layer centers? They are giving me a lot of trouble.
Doug Another approach is to 3cycle them using commutators. I personally like finding and using commutators over doing any sort of pairing or reduction techniques. The commutators I use are 8 twists. Sometimes a 1 or 2 twist setup move is required at the beginning and end.
_________________ Personal Blogâ€”Puzzles plus other interests Crazy 2face Planet Progress Log


Top 


Konrad

Post subject: Re: How to Solve TomZ & Calvin's 4x4x6 Posted: Mon Sep 03, 2012 3:42 am 

Joined: Thu Sep 17, 2009 6:07 am Location: Germany, Bavaria

Here are two commutators that do 3cycles: 1. B2 [r2 d' R2 d]x2 B2 = B2 r2 d' R2 d r2 d' R2 d B2 = [B2:[r2,[d':R2]]] (This last shorthand shows how it is built out of conjugations and a commutator. You do not need to understand this notation, but it is quite useful and used very often in the forum.) Hold U as a 4x4 face. I use WCA notation where d is the inner layer above D and turns like D. r is the inner layer below R and turns like R. It cycles three centre pieces in the U layer: Fur > Bul > Rub > Fur The setup move B2 is not really necessary but it achieves that the 3 pieces are in the same (u) layer.
A 3cycle between two adjacent 4x6 faces: 2. [R2 u' r2 u]x2 = R2 u' r2 u R2 u' r2 u = [R2,[u':r2]] Fdr > Rdb > Ruf > Fdr
_________________ My collection at: http://sites.google.com/site/twistykon/home


Top 



Page 1 of 1

[ 17 posts ] 

Who is online 
Users browsing this forum: No registered users and 2 guests 

You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum


