View unanswered posts  View active topics

Page 1 of 1

[ 3 posts ] 

Author 
Message 
rubikcollector123

Post subject: What is it with edge turning puzzles and shapeshifting? Posted: Fri Sep 27, 2013 8:48 am 

Joined: Fri Nov 05, 2010 2:20 am Location: Wherever

I've noticed that all solids where all edges turn will shapeshift.
Pyramorphinx, helicopter cubes, edge turning octahedra, dodecacopter...
But why? Anyone has an explanation?
_________________ A budding puzzle designer!
Check out my Shapeways shop!


Top 


benpuzzles

Post subject: Re: What is it with edge turning puzzles and shapeshifting? Posted: Fri Sep 27, 2013 2:24 pm 

Joined: Fri Dec 28, 2012 1:50 pm Location: Near Las Vegas, NV

I'll try my best... First of all, consider one edge on a polyhedron. That edge will have 2 endpoints. At either one of those endpoints, there will be at least 2 other edges that meet at that endpoint. There can't be one because that would mean there are also only 2 faces at that endpoint, or vertex, and there must be at least 3 faces around a vertex on a polyhedron. Therefore, there will be at least 2 edges (there can be more than 2, like on an octahedron or icosahedron). Both of those edges will create an angle which is symmetrical, so that means they also have the same vertical slope relative to the first edge. Keep in mind, though, that there are 2 endpoints for each edge. Because of this, there will always be 4 edges adjacent to any single edge with the same vertical slope(although there can be more than 4 total adjacent edges). Now, certain sets of all of those edges that are adjacent will have the same vertical slope. If you imagine an edge turning puzzle, when you turn one edge, a part of one of the adjacent edges will be moving (unless the cut depth is infinitesimally small, but that doesn't really count). Because there are 3 other adjacent edges which have the same vertical slope, the cut of one can align with the cut of another and therefore you can turn another edge in midturn. I hope this makes sense. The reason shapeshifting occurs is because edges only have a 180 degree rotational symmetry, so because you are turning it at an angle greater than or less than that, it causes shapeshifting and/or jumbling.
_________________ My Youtube channel My Shapeways Shop
Last edited by benpuzzles on Fri Sep 27, 2013 6:48 pm, edited 2 times in total.


Top 


mightypuzzle

Post subject: Re: What is it with edge turning puzzles and shapeshifting? Posted: Fri Sep 27, 2013 2:57 pm 

Joined: Thu Mar 07, 2013 2:38 pm Location: U.K

Consider this; a megaminx can do 72* turns till you reach a end point to turn another face and a 3x3 takes 90* to do the same. Therefore the hexaminx would shapeshift and so would the mastermorphix. However, a rhombic dodecahedron takes 90* turns for jumbling and a 180* turn to stay in the rhombic dodecahdron shape. Reducing it to make a cube would cause it to jumble, not shape shift (e.g. helicopter cube). Not sure if I explained it well enough.
_________________ 3x3 PB: 14.87 3x3 average: 20.14


Top 



Page 1 of 1

[ 3 posts ] 

Who is online 
Users browsing this forum: No registered users and 12 guests 

You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum


